Residual heat from a steam turbine may be used to desalinate sea water or purify ground water. The water may be used for human consumption, agricultural, or industrial applications.

Description and Use

Pyrolyzer SWRO Container Units provide pre-filtration and seawater reverse osmosis (SWRO) all in a standard ISO Container. The units are designed to produce water at flow rates up to 300 gpm in single pass mode. The unit is capable of producing potable quality water using raw seawater.

Features

Ø     Up to 300 gpm (1500 m3/day) in single pass mode and up to 150 gpm (750 m3/day) in double pass mode.

Ø     Unit can be mounted on mobile chassis or off-loaded to operate on ground level

Ø     Able to combine with other Mobile units to enhance system capability

Ø     Rejection rates of 95 - 99%

Ø     Removes not only dissolved ions, but also bacteria, pyrogens, organics, particles, colloids, color & oxidizing agents at up to 99.9%

Dimensions

Unit Length 40 ft (12.2 m)

Unit Height 9 ft, 6 in. (2.9 m)

Unit Height w/ chassis 13 ft, 6 in. (4.1 m)

Unit Width 8 ft (2.4 m)

Shipping Weight Approx. 50,000 lb

Operating Weight Approx. 60,000 lb

Systems on Board

Single Pass SWRO

Double Pass SWRO

Recovery 40%

Rejection 95 - 99%

Membrane Toray High Rejection Polyamide Membranes

Ø       Two multi-media filtration vessels (anthracite, garnet, sand)

Ø       Cartridge filters

Ø       Five chemical injects with two inline static mixers

Max. Inlet Pressure 90 psig (6.2 bar)

Min. Inlet Pressure 60 psig (4.1 bar)

Turbidity (maximum) 50 NTU

TSS (maximum) 50 ppm

Electrical

Power -                   One drop of 225 amp

Requirements -        3-phase power (460 VAC)

Breaker size -          250 Amp 3-Phase

Installed KVA -         160 KVA

HVAC

The Combination unit is climate controlled with an HVAC system.